Configuring Phoenix Equipment Systems
(Please fill in as much Information as is Possible)
Type of Chemical being Dispensed: (A)
Polyester _____
Epoxy _____
Urethane _____
Silicon _____
Phenolic _____
Other _________________
Type of Catalyst (B) ___________________________
Type Container in which Product is Contained:
A Drum ____ Pail ____ Other _____________
B Drum ____ Pail ____ Other _____________
Ratio of Component A to B:
1:1 _____
2:1 _____
3:1 _____
5:1 _____
30:1 _____
Other __________________
Desired Machine Output (In Gallons per Minute):
_________________________gpm
Specific Gravity of Components:
A _______________kg/m3
B _______________kg/m3
Page 1 of 2
Viscosity of Components:
A ________________cps. Thixotropic yes ____ no ____
B ________________cps. Thixotropic yes ____ no ____
Any Fillers added to Components (Amount & Type):
A _________% ___________________
B _________% ___________________
How are Components to be Dispensed:
Sprayed _____
Poured _____
Injected _____
Other _____
Mounting Requirements:
Remote Location _____
Distance for dispense Area = __________ft.
Mounted on Machine/Winder _____
Speed of Machine Cross Travel = ______ft/minute
Mounted next to Application Area = _________ft.
Base Mount _____
Wall Mount _____
2” Pole Mount _____
Any Additional Information:
__________________________________________________
__________________________________________________
__________________________________________________
__________________________________________________
__________________________________________________
Page 2 of 2
|
